We Have Baby Rabbits!

proud momFinally! (Though not completely on our own yet; more about that later.)

A little background: We got two eight-week old female rabbits last June, a few weeks later we got a slightly older male (from a different breeder). In October they were old enough to breed, we brought Clover (doe) to Winston’s (buck) cage and they did what needed to be done — though it was awkward and Clover wasn’t very encouraging. But we had officially started breeding our rabbits.

Sorta. It didn’t work, and didn’t work, and didn’t work… We tried Winston with each of the females, repeatedly. We bred in the morning, we bred in the evening, before meals, after meals. Each time it seemed like they couldn’t quite get into the right position for correct “contact”. We read forums and blogs for insight. We inspected the genitalia, we inspected the poops. We tried holding the female in position and “assisting” the male. We fed them a little less to make them leaner. We tried swapping cages so they could smell the other’s scent and get in “the mood”. We tried overnighting them together (they are very docile), rabbits are nocturnal after all. We tried adding apple cider vinegar to their water (supposed to be an aphrodisiac). Then after each attempt we’d wait and see if there were any signs of pregnancy, a couple of times we even waited the whole 28 – 31 day cycle, and we were repeatedly disappointed and discouraged.

WE’RE BREEDING RABBITS, we thought, HOW HARD CAN IT BE!

We mostly took December off, it was very cold here (relatively) and it is a busy month. When January arrived we got together with our good friend Rob, the man we got our rabbits from, to trouble-shoot the situation. We determined we didn’t know if one or more of our rabbits were “broken”/infertile. So we decided to breed our rabbits with his “proven” stock. We brought Clover, to Rob’s place, to spend the night with Bugs (who has fathered many litters). We also brought back his doe, Cali, to spend the night with Winston. This was the middle of January, so we’d know by the middle of February.

Mid-February arrived and Cali/Winston had a litter of 10! So Winston wasn’t shooting blanks and apparently, with the right motivation, could do what needed to be done. But the Clover/Bugs breeding was unsuccessful.

Rewind slightly, two weeks after we bred Clover with Bugs we brought over our other female, Artemis, to breed with Bugs. So even though Clover hadn’t “delivered”, we still had our hopes out for Artemis (and Rob felt very sure, based on their time together, that Artemis would be pregnant).

young kitsFinally the week came, we put in the nesting box and last Thursday morning (2/28) I went out to feed them and we had a litter of seven kits (baby bunnies)! We had six alive and one dead. Unfortunately, likely since it was her first litter, Artemis hadn’t used the nesting box; instead making a nest out of cardboard (that had been lining the nesting box), hay, and of course fur in the corner of her cage. It worked, though I suspect the one that died may have been near the edge and got too cold. I, carefully, moved all the nesting material and then the remaining kits into the nesting box and they quickly snuggled into the soft fur.

To say I was excited was an understatement! (I later described my feelings as “disproportionately excited.”) I took a couple of pictures and then texted Sarah, the kids, and Rob that we had finally been successful!

We’re now about a week in, mom and babies all seem to be doing very well. Artemis appears to be a good mom and the kits seem to be growing and developing appropriately.

The next test, now that we know both Winston and Artemis “work” is to successfully breed our two rabbits together. We’ll do that in a couple of months.

We traded Clover, with Rob, for a four-month old female. We’ll breed the new female, Clover 2.0, when she reaches six months.

I write about this not only to share our failures and victories, but again as a warning: ANYTHING in your preps that you’re going to depend on needs to be tested first. Last summer we would have asked, “What could possible go wrong breeding rabbits? They breed like rabbits, right?” Finally after four months we are, mostly, successful.

Test, and retest your preps, plans, and the systems you have in place. Be sure you know how to use them, take the time to actually make them work appropriately, know basic trouble-shooting steps, and then share this information with the rest of your family.

 

What We Did This Week To Prep 7/13/12

It’s been a busy week as we get ready to leave on a family vacation. We’re heading to Colorado Springs, CO to see my parents and other assorted family members. We’re looking forward to the trip; my two youngest, Emily and Alison, have never flown before and are very excited about that.

We did get a few things done. We picked up a seven month old male American Chinchilla Rabbit this week, from another breeder. He will be the patriarch of our future litters; he’s full grown and sexually mature. The does are just three months old now and we need to wait until they are five months to breed them; so the first breeding will be about mid-September. (Winston, our male, looks more brown than gray in the picture, my understanding is that his coat was discolored from the sunlight.)

Speaking of does, I should instead say doe. As advised, we went back and “sexed” our two younger rabbits to ensure they were both female. Turns out one is male. It’s much harder to determine, especially when they’re young, than I would have thought.  Rob, the breeder we got them from, is more than happy to exchange him for a her. I’ll be going to Rob’s place in just over a week to learn from, and help, him butcher his next batch of rabbits. I’ve never done that before and I look forward to the opportunity to learn, but am a little cautious about how I will feel doing it. I believe in what we’re doing and I think it’s important, but taking another life is–and I believe should always be–a difficult thing. I’ve discussed it with Rob and he’s very respectful and efficient about it.

One of the things I really wanted to get done this week, and did–sort of–was to set up an automatic watering system in the rabbitry. Trying to attach a 2-liter water bottle to the side of the hutches is a pain in the butt; I wanted a system that would provide them plenty of water and we wouldn’t have to hassle with it. Sarah’s Mom will be staying at our place and taking care of the dog, cat, rabbits, and garden while we’re gone and I  wanted to make things as easy as possible for her. The system we built basically worked, though I’ll have to spend some time fine tuning it when we get back. We put it together using a 5-gallon bucket to hold the water, 1/2 PVC pipe, and attachments and auto feeding spouts (I got from the feed store). I have little experience with plumbing or PVC piping, but it seemed simple enough. My first attempt leaked too much and had to be redone. It still drips a little and I’ve only routed it to the first two hutches, but it’s fine for now and will be relatively easy to fix and extend as needed. My eventual goal is to use the surface area of the rabbitry (4’ x 12’ = 48 square feet) to catch rain water and channel it into the 5-gallon bucket. After all, we live in Western Washington and have plenty of rainfall, even on that small surface we could collect almost 1200 gallons of water annually; yields will be as low as 30 gallons in July and as high as 170 gallons in November.

What did you do?

 

What We Did This Week To Prep 5/4/12

Our greenhouse is up and running. All of the seedlings are out there enjoying the available sunshine while being shielded from the wind, elements, and most of the cold. The plants seem to be doing well. Sarah went out and transplanted the sprouts from the small starter containers into larger ones to allow them to have their own space and grow larger and stronger. It’ll be interesting to see how big the seedlings get before we put them into the ground mid-June. When it comes to gardening–including maximizing our greenhouse–we’re still learning so much; someday this will all become routine, but we’re still a long way from there.

Recently, on The Survival Podcast (TSP), Jack interviewed ‘Joe Nobody’ (TSP episode 881). Joe is a former military man with extensive security expertise. I was skeptical when I first heard about the interview thinking him to be “one of those guys”. But I was impressed with his logical reasoning and common sense approach to security, both personal and property. I bought two of his books after hearing the interview: a how-to book, Holding Your Ground – Total Defense and his first novel, Holding Their Own – A Story of Survival. I’m almost done with the novel and I’ve looked through Holding Your Ground and I’ve enjoyed and am impressed with both. While we discuss security as one of our basic needs, Joe takes it to a whole new level. Will a collapse/SHTF event happen on a level that these types of security skill-sets will be necessary? I don’t know, probably not in the way they are portrayed by Hollywood or even in Joe’s novel. But could we have a couple of weeks of chaos and local anarchy? Yes we could, and that is far more likely. While we know we need to eat, drink, have energy and be sheltered on a daily basis (and those should be our top priorities), security needs to be part of any plan you develop for your family or group. Personally I am expanding our family’s security plan, and adding equipment, based on his advice.

Sarah recently bought us Storey’s Guide to Raising Rabbits – Breeds, Care, Facilities. It will provide us with information on all things rabbits. It also has some good plans/ideas for hutches, I already have most of the needed materials in the back and now that the greenhouse is done that’s the next project. We have also found Rise and Shine Rabbitry (the link can also be found on my blogroll) to be a great resource; Rick Worden has put together extensive, usable information there and he also puts out a lot of good information on his facebook page.

What did you do?