This weekend, with the beautiful weather we had here, Trace and I decided to work on some of our outdoor projects. I was able to build my potato box (in one day) and asked Trace if I could share the results, on our blog, sooner rather than later!

This year will be our first year growing potatoes. As we understand the way potatoes grow, they need soil added as the plant grows bigger to further stimulate production. Many people choose to simply mound the dirt around their plants or use old tires for their potato ‘frame’. However, years ago (before Trace) I saw a design for a ‘potato box’ that allows the grower to harvest the baby (or new) potatoes throughout the growing season.

We had already bought all the materials needed: one treated 2x4x12 and ten 1x6x6 boards (actually fence slats).

We pulled out the power tools – my dad’s mitre saw (which now ‘lives’ at our house) and the drills (plural because, if you have two, you don’t have to switch bits between the pre-drilling and the screwing in of the screws) – and, after quick review on how to use each, I got started (I’d used drills before, but not the saw).

My first step was to cut the 2x4x12 into four 33-inch pieces. These will be the upright corner posts. (A handy tip from Trace: measure from the end for each cut, that way you don’t lose the width of the saw blade from your cut). I then cut the 1x6s into twenty 24-inch pieces.

Next, I attached four 1x6s across the upright 2x4s to form the bottom frame into a square.

Originally I’d intended to build up just two layers of boards, leaving the rest to be added as dirt was piled onto the growing potatoes. I realized, however, that there was no reason not to build three sides up completely and only have one unfinished/working side. The first side went slowly as I lined up each board, pre-drilled the holes and then attached them. The second and third sides went much faster as I got used to the tools and the box gained more and more stability.

The fourth side boards will be attached as we add dirt. These will be attached with only one screw on each side, for easy removal, with the intention of harvesting the potatoes at the bottom of the box early, while allowing the rest to continue to grow.

We placed the three-sided box at the corner of our garden, where sun will hit the open side and we had some good dirt. I planted the seed potatoes–Kennebec and Red Pontiac–and hopefully, fingers crossed, we’re good to go for this year’s potato crop.

(Wednesday: Momma Bear)